Articles in Conference Proceedings
Othman, A. K., Nair, N. J., Sandeep, A., Goza, A., & Wissa, A. (2022). Numerical and Experimental Study of a Covert-Inspired Passively Deployable Flap for Aerodynamic Lift Enhancement. In AIAA AVIATION 2022 Forum (p. 3980). https://doi.org/10.2514/6.2022-3980
Alvarez, Anna, and Aimy Wissa. "Bird-inspired morphing wings: Design and experimental evaluation of a wing folding mechanism for pitch stability control." Smart Materials, Adaptive Structures and Intelligent Systems. Vol. 85499. American Society of Mechanical Engineers, 2021.
Zekry D., C. Duan, M. Ito, and A. Wissa. “Design of Experiments for Two-and Three-Dimensional Bio-inspired Flow Control Devices”, AIAA SciTech 2021 Forum. (4 January 2021) https://doi.org/10.2514/6.2021-0467
Kyung Jun Lee and Aimy Wissa "Dynamic characterization of a bio-inspired variable stiffness multi-winglet device", Proc. SPIE 11377, Behavior and Mechanics of Multifunctional Materials IX, 113770K (21 May 2020); https://doi.org/10.1117/12.2558348
Towards Mission Adaptability of Small UAVs: A Leading-Edge Alula-Inspired Device (LEAD). D Zekry, S Cheng, L Chamorro, A Wissa - APS Division of Fluid Dynamics Meeting Abstracts, 2020
Ito, M, C Duan, L Chamorro, and A Wissa. "A Leading-Edge Alula-Inspired Device (LEAD) for Stall Mitigation and Lift Enhancement for Low Reynolds Number Finite Wings." Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2018-8170 San Antonio, TX. (Abstract and full draft paper were subject to peer review)
Angatkina, O, B. Chien, A. Pagano, T. Yan, A. Alleyne, S. Tawfick, and A. Wissa. "A Metameric Crawling Robot Enabled by Origami and Smart Materials," Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2017-3836, Snowbird, UT. (Abstract and full draft paper were subject to peer review)
Pagano, A., B. Leung, T. Yan, B. Chien, A. Wissa, and S. Tawfick "Multi-Stable Origami Structure for Crawling Locomotion," Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2016-9071, Stowe, VT. (Abstract and full draft paper were subject to peer review)
Waite, J., C. Duan, G. Reich, and A. Wissa "Computational Model for Application of Avian Covert Feathers to Aerial Vehicles," International Conference of Adaptive Structures and Technologies 2016, Bolton Landing, NY.
Mandadzhiev, B., M. Lynch, L. Chamorro, and A. Wissa "Alula-inspired Leading Edge Device for Low Reynolds Number Flight," Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2016-9210, Stowe, VT.
Hasnain, Z., J. Hubbard Jr., J. Calogero, M. Frecker, and A. Wissa, "Understanding the Relationship Between Pitch Agility and Propulsive Aerodynamic Forces in bio-inspired Flapping Wing Vehicles,” Proc. Smart Materials, Adaptive Structures, and Intelligent Systems Conference, 2015-8835, Denver, CO.
Wissa, A., J. Calogero, and J. Hubbard, Jr., "Stability Analysis of the wing leading edge spar of a passively morphing ornithopter," Proc. Smart Materials, Adaptive Structures, and Intelligent Systems Conf. 2014-7528, Newport, RI.
Tummala, Y., M. Frecker, A. Wissa, and J. E. Hubbard, Jr., "Design optimization of twist compliant mechanism," Proceedings of Smart Materials, Adaptive Structures and Intelligent Systems Conference, 2013, Snowbird, UT.
Tummala, Y., M. Frecker, A. Wissa, and J. E. Hubbard, Jr., "Design and optimization of bend-and-sweep compliant mechanism," Proceedings of International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 2013-12338, Portland, OR.
Tummala, Y., M. Frecker, A. Wissa, and J. E. Hubbard, Jr., "Design of bend-and-sweep compliant mechanism for passive shape change," Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2012-7996, Stone Mountain, GA.
Wissa, A., Y. Tummala, J. E. Hubbard, Jr., M. Frecker, and A. Brown, "Testing of novel compliant spines for passive wing morphing," Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2011-5198, Scottsdale, AZ.
Tummala, Y., A. Wissa, M. Frecker, and J. E. Hubbard, Jr., " Design optimization of a compliant spine for dynamic applications," Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2011-5207, Scottsdale, AZ.
Tummala, Y., A. Wissa, M. Frecker, and J. E. Hubbard, Jr., "Design of a passively morphing ornithopter wing using a novel compliant spine," Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2010-3637, Philadelphia, PA.